Newsflash
Our family of electrical motors has been extended. Check out the motors section!
Obsolete products
 |
SAC-USB Programming Adapter The SAC-USB programming adapter allows the communication with SAC drive controllers over the USB Interface. |
| PC software for KOP chargers with the extended version of firmware. This firmware supports additional functions like pulse charging, voltage gradient detection etc. |
 |
DC/DC converter 48V/13V |
|
| Input voltage: | 30 V to 60 V DC | |
| Output voltage: | 13,6 V DC | |
| Standby input current: | < 40 mA | |
| Continous output current: | 20 A | |
| Peak output current: | 22 A | |
| Efficiency: | 93 % | |
| Dimensions: | 153 x 83 x 110 mm | |
| Weight: | 0,7 kg | |
|
DC/DC converter 75V/13V |
|
| Input voltage: | from 40 V to 85 V DC | |
| Output voltage: | 13,6 V DC | |
| Standby input current: | < 40 mA | |
| Continous output current: | 20 A | |
| Peak output current: | 22 A | |
| Efficiency: | 93 % | |
| Dimensions: | 153 x 83 x 110 mm | |
| Weight: | 0,7 kg | |
|
DC/DC converter 48V/13V with charging function |
|
| Input voltage: | 30 V to 60 V DC | |
| Output voltage: | 13,6 V DC | |
| Standby input current: | < 40 mA | |
| Continous output current: | 20 A | |
| Peak output current: | 22 A | |
| Efficiency: | 93 % | |
| Dimensions: | 153 x 83 x 110 mm | |
| Weight: | 0,7 kg | |
 |
SAC41 system with 40kW bio oil cooled motor
|
|
15kW Battery tester / discharger
|
 |
40kW PMSM - Bio-oil cooled |
|
| Type: | PMSM 3~ | |
| Rated power: | 40 kW (53 HP) | S1 | |
| Speed: | 2600 RPM | |
| Rated current: | 240 A | |
| Voltage: | 140 V | |
| Frequency: | 360 Hz | |
| Rated torque: | 153 Nm | |
| Weight: | 78 kg | |
 |
60kW AM - Water cooled |
|
| Type: | 3~ AM | |
| Rated power: | 65 kW (88 HP) | S2 30min | |
| Speed: | 3000 RPM | |
| Voltage: | 150 V | |
| Rated current: | 339 A | |
| Frequency: | 101.5 Hz | |
| Torque: | 203 Nm | |
| Weight: | 137 kg | |
Page 1 of 2