New product: KOP2300 - a 2.3kW IP65 power charger for battery voltages up to 59.5 V and currents up to 45A
Electronic single lever control for side mounting
Fully redundant (dual-die) single lever control for side mounting. Suitable for all SAC systems with GD2 display.
3000W Power Supply
|Rated power:||3000 W|
|Output voltage range:||10 ... 55 V|
|Output current range:||0 ... 55 A|
|Input voltage:||180 ... 264 VAC|
|Cooling type:||Air (vented)|
|Dimensions:||355 x 277 x 153 mm|
Heating and ventilation units for electrical vehicles
|Battery voltage:||12 to 48 V|
|Nominal power:||1kW (800W for 12V version)|
|Max. power||up to 1.5 kW|
SAC-USB2 Galvanically Isolated Programming Adapter
The SAC-USB2 programming adapter allows the communication with SAC drive controllers over the USB Interface.
KOP-USB2 Programming Adapter
The new programming adapter for KOP Chargers allows the communication with KOP chargers directly over the USB Interface and has an integrated power supply. It is not necessary any more (as before) to supply the PC interface from the battery or power supply.
- C4DR6 - Standard wiring harness for the SAC1-90A/SAC4/SAC4W drive controller with the GD2 display
- C60D6 - Standard wiring harness for the SAC4HV/SAC4W-HV/SAC30/SAC51/SAC60 drive controllers with the GD2 display
Custom specific versions available on request.